Best practices for working with Microsoft Graph

This article describes best practices that you can apply to help your applications get the most out of Microsoft Graph—whether that involves learning about Microsoft Graph, improving app performance, or making your application more reliable for end users.

Use Graph Explorer to get to know the API

The easiest way to start exploring the data available through Microsoft Graph is to use Graph Explorer. Graph Explorer lets you craft REST requests (with full CRUD support), adapt the HTTP request headers, and see the data responses. To help you get started, Graph Explorer also provides a set of sample queries.

Experiment with new APIs before you integrate them into your application.

Authentication

To access data through Microsoft Graph, your application will need to acquire an OAuth 2.0 access token, and present it to Microsoft Graph in either of the following options:

  • The HTTP Authorization request header, as a Bearer token
  • The graph client constructor, when using a Microsoft Graph client library

Use the Microsoft Authentication Library API, MSAL to acquire the access token to Microsoft Graph.

Apply the following best practices for consent and authorization in your app:

  • Apply least privilege. Grant users and apps only the lowest privileged permission they require to call the API. Check the permissions section in the method topics (for example, see creating a user), and choose the least privileged permissions. For example, if the app will read only the profile of the currently signed-in user, grant User.Read instead of User.ReadBasic.All. If an app doesn't read the user's calendar, do not grant it the Calendars.Read permission. For a full list of permissions, see permissions reference.

  • Use the correct permission type based on scenarios. Avoid using both application and delegated permissions in the same app. If you're building an interactive application where a signed-in user is present, your application should use delegated permissions. If, however, your application runs without a signed-in user, such as a background service or daemon, your application should use application permissions.

    Caution

    Using application permissions for interactive scenarios can put your application at compliance and security risk. It can inadvertently elevate a user's privileges to access data, bypassing policies configured by an administrator.

  • Be thoughtful when configuring your app. This will directly affect end user and admin experiences, along with application adoption and security. For example:

    • Your application's name, logo, domain, publisher verification status, privacy statement, and terms of use will show up in consent and other experiences. Configure these settings carefully so they are understood by your end users.
    • Consider who will be consenting to your application - either end users or administrators - and configure your application to request permissions appropriately.
    • Ensure that you understand the difference between static, dynamic, and incremental consent.
  • Consider multi-tenant applications. Expect customers to have various application and consent controls in different states. For example:

    • Tenant administrators can disable the ability for end users to consent to applications. In this case, an administrator would need to consent on behalf of their users.
    • Tenant administrators can set custom authorization policies such as blocking users from reading other user's profiles, or limiting self-service group creation to a limited set of users. In this case, your application should expect to handle 403 Forbidden error response when acting on behalf of a user.

Handle responses effectively

Depending on the requests you make to Microsoft Graph, your applications should be prepared to handle different types of responses. The following are some of the most important practices to follow to ensure that your application behaves reliably and predictably for your end users.

Pagination

When querying a resource collection, you should expect that Microsoft Graph will return the result set in multiple pages, due to server-side page size limits. When a result set spans multiple pages, Microsoft Graph returns an @odata.nextLink property in the response that contains a URL to the next page of results.

For example, listing the signed-in users messages:

GET https://graph.microsoft.com/v1.0/me/messages

Would return a response containing an @odata.nextLink property, if the result set exceeds the server-side page size limit.

"@odata.nextLink": "https://graph.microsoft.com/v1.0/me/messages?$skip=23"

Note

Your application should always handle the possibility that the responses are paged in nature, and use the @odata.nextLink property to obtain the next paged set of results, until all pages of the result set have been read. The final page will not contain an @odata.nextLink property. You should include the entire URL in the @odata.nextLink property in your request for the next page of results, treating the entire URL as an opaque string.

For more details, see paging.

Handling expected errors

While your application should handle all error responses (in the 400 and 500 ranges), pay special attention to certain expected errors and responses, listed in the following table.

Topic HTTP error code Best practice
User does not have access 403 If your application is up and running, it could encounter this error even if it has been granted the necessary permissions through a consent experience. In this case, it's most likely that the signed-in user does not have privileges to access the resource requested. Your application should provide a generic "Access denied" error back to the signed-in user.
Not found 404 In certain cases, a requested resource might not be found. For example a resource might not exist, because it has not yet been provisioned (like a user's photo) or because it has been deleted. Some deleted resources might be fully restored within 30 days of deletion - such as user, group and application resources, so your application should also take this into account.
Throttling 429 APIs might throttle at any time for a variety of reasons, so your application must always be prepared to handle 429 responses. This error response includes the Retry-After field in the HTTP response header. Backing off requests using the Retry-After delay is the fastest way to recover from throttling. For more information, see throttling.
Service unavailable 503 This is likely because the services is busy. You should employ a back-off strategy similar to 429. Additionally, you should always make new retry requests over a new HTTP connection.

Handling future members in evolvable enumerations

Adding members to existing enumerations can break applications already using these enums. Evolvable enums is a mechanism that Microsoft Graph API uses to add new members to existing enumerations without causing a breaking change for applications.

Evolvable enums have a common sentinel member called unknownFutureValue that demarcates known members that have been defined in the enum initially, and unknown members that are added subsequently or will be defined in the future. Internally, known members are mapped to numeric values that are less than the sentinel member, and unknown members are greater than the sentinel member. The documentation for an evolvable enum lists the possible string values in ascending order: known members, followed by unknownFutureValue, followed by unknown members. Like other types of enumerations, you should always reference members of evolvable enums by their string values.

By default, a GET operation returns only known members for properties of evolvable enum types and your application needs to handle only the known members. If you design your application to handle unknown members as well, you can opt-in to receive those members by using an HTTP Prefer request header:

Prefer: include-unknown-enum-members

Storing data locally

Your application should ideally make calls to Microsoft Graph to retrieve data in real time as necessary. You should only cache or store data locally if required for a specific scenario, and if that use case is covered by your terms of use and privacy policy, and does not violate the Microsoft APIs Terms of Use. Your application should also implement proper retention and deletion policies.

Optimizations

In general, for performance and even security or privacy reasons, you should only get the data your application really needs, and nothing more.

Use projections

Choose only the properties your application really needs and no more, because this saves unnecessary network traffic and data processing in your application (and in the service).

Note

Use the $select query parameter to limit the properties returned by a query to those needed by your application.

For example, when retrieving the messages of the signed-in user, you can specify that only the from and subject properties be returned:

GET https://graph.microsoft.com/v1.0/me/messages?$select=from,subject

When you make a GET request without using $select to limit the amount of properties data, Microsoft Graph includes a @microsoft.graph.tips property that provides a best practice recommendation for using $select similar to the following message:

"@microsoft.graph.tips": "Use $select to choose only the properties your app needs, as this can lead to performance improvements. For example: GET groups?$select=appMetadata,assignedLabels",

Getting minimal responses

For some operations, such as PUT and PATCH (and in some cases POST), if your application doesn't need to make use of a response payload, you can ask the API to return minimal data. Note that some services already return a 204 No Content response for PUT and PATCH operations.

Note

Request minimal representation responses using the Prefer header set to return=minimal, where supported. For creation operations, use of this header might not be appropriate because your application may expect to get the service generated id for the newly created object in the response.

Track changes: delta query and webhook notifications

If your application needs to know about changes to data, you can get a webhook notification whenever data of interest has changed. This is more efficient than simply polling on a regular basis.

Use webhook notifications to get push notifications when data changes.

If your application is required to cache or store Microsoft Graph data locally, and keep that data up to date, or track changes to data for any other reasons, you should use delta query. This will avoid excessive computation by your application to retrieve data your application already has, minimize network traffic, and reduce the likelihood of reaching a throttling threshold.

Use delta query to efficiently keep data up to date.

Using webhooks and delta query together

Webhooks and delta query are often used better together, because if you use delta query alone, you need to figure out the right polling interval - too short and this might lead to empty responses which wastes resources, too long and you might end up with stale data. If you use webhook notifications as the trigger to make delta query calls, you get the best of both worlds.

Use webhook notifications as the trigger to make delta query calls. You should also ensure that your application has a backstop polling threshold, in case no notifications are triggered.

Batching

JSON batching allows you to optimize your application by combining multiple requests into a single JSON object. Combining individual requests into a single batch request can save the application significant network latency and can conserve connection resources.

Use batching where significant network latency can have a big impact on the performance.

Reliability and support

To ensure reliability and facilitate support for your application:

  • Use TLS 1.2 to support all capabilities of Microsoft Graph. For more information about the Microsoft Graph TLS 1.0 and 1.1 deprecation, see Enable support for TLS 1.2 in your environment.
  • Honor DNS TTL and set connection TTL to match it. This ensures availability in case of failovers.
  • Open connections to all advertised DNS answers.
  • Generate a unique GUID and send it on each Microsoft Graph REST request. This will help Microsoft investigate any errors more easily if you need to report an issue with Microsoft Graph.
    • On every request to Microsoft Graph, generate a unique GUID, send it in the client-request-id HTTP request header, and also log it in your application's logs.
    • Always log the request-id and Date from the HTTP response headers. These, together with the client-request-id, are required when reporting issues in Microsoft Q&A or to Microsoft Support.